Job Sheet-25M4240D_F0401B-01-S3.

Path : D:\sejong\model\2025\25M4240D\0401B-01\0401B-01_03\ Geometry : 25M4240D_F0401B-01_250722_x_t.wnc , 25M4240D_F0401B-01-S3.wnc P/G : M04960 Jul28.htm
X_Min : -120.273,          X_Set_A :   -125.273 Y_Max : 70.277,          Y_Set_A :   75.277 Z_Max : 175.000
X_Max : 120.273,          X_Set_A :   125.273 Y_Min : -70.277,          Y_Set_A :   -75.277 Z_Min : -1.146
X_Center : 0.000 Y_Center : -0.000
X_Length 240.55 Y_Length 140.55 Z_Length 176.15

images/basepart.png

..
---|Warning---Z_Max: : 175.00 ---
---|Warning---Z_Min : : -1.15 ---
---MC960 -25M4240D_F0401B-01-S3.Jul28.jpg---- , Programmer's Comment : 144H
NCD Toolpath Type T_No Cutter Image D,¢± R_cn Holder Safe Tool Length Zmin
(R_cen) 		Stock Krpm Time
O5701 Global Rough/Rerough 3 ToolpathCutterShape 26.00 2.00 R:2.00 Bull-nose, A02-BT50_C42-135-SRS 85.00 -90.07 0.50 2.0 00:15
O5702 Flat Surface Finishing 3 ToolpathCutterShape 26.00 2.00 R:2.00 Bull-nose, A02-BT50_C42-135-SRS 25.70 -16.53 (W) 2.50 (E) 0.40 1.7 00:01
O5703 Z-Level Finishing 7 ToolpathCutterShape 21.00 0.80 R:0.80 Bull-nose, A02-BT50_C42-135-SRS 85.70 8.30 0.20 2.8 01:05
O5704 Flat Surface Finishing 7 ToolpathCutterShape 21.00 0.80 R:0.80 Bull-nose, A02-BT50_C42-135-SRS 24.30 -16.73 (W) 0.40 (E) 0.20 2.8 00:00
O5705 Z-Level Finishing 10 ToolpathCutterShape 12.90 1.00 R:1.00 Bull-nose, B02-BT50_HF12_225N-SRS 17.00 39.00 0.00 5.0 00:05
O5706 Flat Surface Finishing 10 ToolpathCutterShape 12.90 1.00 R:1.00 Bull-nose, B02-BT50_HF12_225N-SRS 17.00 -32.93 (W) 0.10 (E) 0.00 5.0 00:00
-
O5707 Flat Surface Finishing 11 ToolpathCutterShape 21.00 1.00 R:1.00 Bull-nose, B03-BT50_HF20-165H-SRS 11.00 -16.88 (W) 0.40 (E) 0.05 3.6 00:01
O5708 Optimized Planar Finishing 12 ToolpathCutterShape 21.00 B03-BT50_HF20-165H-SRS 31.50 -32.11 0.10 3.6 00:10
O5709 Optimized Planar Finishing 12 ToolpathCutterShape 21.00 B03-BT50_HF20-165H-SRS 42.90 -36.20 0.10 3.6 00:07
O5710 Optimized Planar Finishing 12 ToolpathCutterShape 21.00 B03-BT50_HF20-165H-SRS 32.30 -32.04 0.10 3.6 00:02
O5711 Optimized Planar Finishing 12 ToolpathCutterShape 21.00 B03-BT50_HF20-165H-SRS 42.90 -36.21 0.10 3.6 00:05
O5712 Z-Level Finishing 11 ToolpathCutterShape 21.00 1.00 R:1.00 Bull-nose, B03-BT50_HF20-165H-SRS 70.90 7.81 0.10 3.6 00:25
-
O5713 Planar Finishing 11 ToolpathCutterShape 21.00 1.00 R:1.00 Bull-nose, B03-BT50_HF20-165H-SRS 28.40 50.10 0.10 3.6 00:02
O5714 Z-Level Finishing 13 ToolpathCutterShape 8.00 1.00 R:1.00 Bull-nose, B02-BT50_HF08_225N-SRS 17.20 45.95 0.10 6.0 00:01
-
O5715 Flat Surface Finishing 11 ToolpathCutterShape 20.96 1.00 R:1.00 Bull-nose, B03-BT50_HF20-165H-SRS 11.00 -16.93 (W) 0.00 (E) 0.00 3.6 00:00
O5716 Optimized Planar Finishing 11 ToolpathCutterShape 21.00 B03-BT50_HF20-165H-SRS 31.40 -32.13 0.00 4.0 00:19
O5717 Optimized Planar Finishing 11 ToolpathCutterShape 21.00 B03-BT50_HF20-165H-SRS 42.80 -36.20 0.00 4.0 00:12
O5718 Optimized Planar Finishing 11 ToolpathCutterShape 21.00 B03-BT50_HF20-165H-SRS 33.00 -32.02 0.00 4.0 00:03
O5719 Optimized Planar Finishing 11 ToolpathCutterShape 21.00 B03-BT50_HF20-165H-SRS 42.80 -36.21 0.00 4.0 00:10
O5720 Z-Level Finishing 12 ToolpathCutterShape 20.96 1.00 R:1.00 Bull-nose, B03-BT50_HF20-165H-SRS 67.10 9.70 0.00 3.6 00:23
-
O5721 Planar Finishing 12 ToolpathCutterShape 20.96 1.00 R:1.00 Bull-nose, B03-BT50_HF20-165H-SRS 29.10 46.81 0.00 3.6 00:02
O5722 Z-Level Finishing 13 ToolpathCutterShape 7.98 1.00 R:1.00 Bull-nose, B02-BT50_HF08_225N-SRS 17.90 -27.20 0.00 6.5 00:01
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22, Selected : 768486.94mm Total Time : 03:42
(Each-PP) : 55_G155 ¡Ù¡Ù [ VM960 ] ¡Ù¡Ù ,   Saved File Name : M04960 22Jul28.htm, Save time : 20:47:43 , Saved Counter : 22
---Sort By Tool_NO--- Se Jong Precision Machinery Co. LTD, Tel : 031 666 1325, Fax : 031 666 1327 ---EnLarge Image---